ZTR for iPad Pro 12.9″ 5th Gen (2021) 6th Gen (2022) LCD Screen Replacement Assembly (Mini-LED) A2461 A2378 A2379 / A2436 A2764 A2437 LCD Display Touch Digitizer Premium Repair Kit with Tools

Price: $36.99
(as of Dec 22,2025 02:15:58 UTC – Details)

Product description

ipad pro 12.9'' 5th/6th gen srceen replacement

ipad pro 12.9'' 5th/6th gen srceen replacement For iPad Pro 12.9” 2021/ 2022 Digitizer

Professional Screen Replacement Kit – Revitalize Your Device!

NOTE: If you are not a professional technician or lack experience in repairing electronic devices, we do not recommend replacing the screen by yourself. Please seek assistance at a repair shop to save both time and money.

Package Includes:

1x For iPAD Pro 5th / 6th Display Touch Screen Replacement

1x Strong Suction Cup/ 2x Triangle Opening Tools/ 1x Card Pin/

1x Plastic Pry Bar/ 1x Metal Scraper/1x Screw Handle & 3 Screwdriver Bits

LiDAR sensor assembly information for iPad Pro 11” 1st/2nd Separate each sensor of screen

The LiDAR sensor assembly is composed of four total sensors:

Two ambient light sensorsOne proximity sensorOne microphone ambient light sensor. Separate ambient light sensor

Insert your angled tweezers between the ambient light sensor and the screen.Pry up to separate the sensor from the screen.Repeat this procedure. For iPad Pro 11 1st/2nd Gen Screen Replacement LCD Digitizer Assembly Remove LiDAR sensor assembly

Slide an opening pick under the LiDAR sensor assembly cable to separate it from the screen.Remove the LiDAR sensor assembly. During reassembly Reassembly secure cable screen

Align the LiDAR sensor assembly on your replacement screen.Use tape or adhesive to secure the cables. Only apply adhesive to the edges of the sensors.

Display cable information for iPad Pro 11” 1st/2nd Remove the display cable bracket Separate non-removable cable

Our replacement screen does not come with the two removable display cables. You need to remove and transfer these cables in the bottom right corner Remove cable bracket

Use a screwdriver to remove the two 1.2 mm screws securing the display cable bracket.Remove the display cable bracket. remove and transfer these cables Remove the narrow cable

Use the flat end of a spudger to pry up and disconnect the narrow display cable.Remove the narrow display cable. Set it aside for reassembly. Disconnect and remove the wide display cable. Remove the wide cable

Use the flat end of a spudger to pry up and disconnect the narrow display cable.Remove the wide display cable. Set it aside for reassembly.

For iPad Pro 11 1st/2nd Gen Screen Replacement LCD Digitizer Assembly

High Quality LCD Display Touch Screen Digitizer Assembly Glass Panel Full Replacement Repair Parts Kits For IPAD Pro 5th (2021) Pro 6th Gen (2022)

Compatibility: For iPad Pro 12.9″ 5th Gen 2021 A2461 A2378 A2379 / 6th Gen 2022 A2436 A2764 A2437

Important Notes:

If you are not a professional in repairing or do not have any experience with repairing electronic equipment, we do not recommend that you replace the screen yourself. Please take it to a repair store for help to save your time and money. If the screen is damaged during your installation, it is out of our after-sales range, and we may not be able to compensate for your mistake. We hope you can understand.Before finishing the installation, please remove the battery from your equipment. Only after you have connected the new screen properly should you restart your equipment and test the new screen. Before confirming that the screen works perfectly, please do not use adhesive to install our screen on your equipment. If the screen is glued, we cannot accept returns or offer refunds.Before installing, please power off the device to avoid any irregularities, then use a hairdryer (or others) on low heat to soften the adhesive around the screen for straightforward removal.All our products are thoroughly tested by QC before shipping to ensure they work perfectly on your equipment. However, screens are made of glass, so please be very careful when opening the parcel or installing the screen to prevent damage.We provide a 1-month after sales. As long as the screen is free from any man-made or physical damage, we will exchange it for a new one if it does not work normally. You can feel free to order with confidence.If you have any issues with your order, please do not hesitate to let us know. We will kindly provide assistance within 24 hours.

For iPad LCD Screen Replacement

Add to Cart

Price

$279.99$279.99

$149.99$149.99

$155.99$155.99

$148.88$148.88

$229.99$229.99

$279.99$279.99

Provided By

ZTR

Compatible Modes

iPad Pro 12.9″ 5th/6th

iPad Pro 11 1st/ 2nd Gen

iPad Pro 11” 3rd /4th

iPad Air 4th 10.9”

iPad Air 5th 10.9”

iPad mini 6th 8.3”

iPad mini 7th 8.3”

Release Date

2021/2022

2018/2020

2020

2022

2021

2024

Display Size

12.9 inch

11 inch

10.9 inch

8.3 inch

Hertz

120

Resolution

2732 x 2048

2388 x 1668

2360 x 1640

2266 x 1488

Face ID

✔

LiDAR sensor

✘

✔

✘

Installation Instructions: Before installing this for iPad Pro 5th/ Pro 6th Gen screen replacement, we recommend that you watch some installation videos on YouTube. We strongly suggest that you have some experience before attempting the installation to avoid any potential damage to your device.
Superior Quality: Our for iPad Pro 5/ Pro 6 screen replacement with full perspective, anti-fingerprint, smooth touch. And our screen replacement for iPad Pro 5/6 have passed rigorous quality control checks and we will pack them well before shipment.
Package Including: The package including Package includes：1 * for iPad Pro 5th / 6th Gen LCD screen + 1 * Screw handle & 3 Screwdriver bits + 1 * Metal scraper + 1 * Plastic pry bar + 1 * Suction Cup + 2 * Triangle Opening Tools + 1* Card Pin
Design For You : factory direct sales–Good Product Quality. All iPad LCD screens are strictly QC double tested. If you find any problem after receiving our LCD screen, after learning the specific situation, we will immediately solve the problem for you and provide suitable and effective solutions.